linux gnumeric安装

安装gnumeric
yum install gnumeric
使用ssconvert报错解决方案
1、
process 4625: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
解决方法:启动dbus
service messagebus start
2、

解决方法: 输入命令行
export DISPLAY=:0.0
还有个Sans font字体报错
** (ssconvert:21762): WARNING **: Configured default font 'Sans 10.000000' not available, trying fallback...
** (ssconvert:21762): WARNING **: Fallback font 'Sans 10.000000' not available, trying 'fixed'...
** (ssconvert:21762): WARNING **: Even 'fixed 10' failed ?? We're going to exit now,there is something wrong with your font configuration
最后发现以上所有错误都是缺少python模块造成的
解决方法:
python 2.7.9 需要版本以上
安装模块
pip install SpreadSheetConverter



本文作者:起点终站
文章标题: linux gnumeric安装
本文地址:https://blog.hellozwh.com/?post=225
版权声明:若无注明,本文皆为“起点终站”原创,转载请保留文章出处。
本文地址:https://blog.hellozwh.com/?post=225
版权声明:若无注明,本文皆为“起点终站”原创,转载请保留文章出处。


