
Warning: Permanently added the RSA host key for IP address '192.30.252.131' to the list of known hosts.
Permission denied (publickey).fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
出现这个问题是因为,没有在github账号添加SSH key
解决方法如下
在终端输入。
ssh-keygen -t rsa -C "forwhat.cn"//注意。forwhat.cn为用户名
如果执行成功。返回
Generating public/private rsa key pair.
Enter file in which to save the key (/home/forwhat.cn/.ssh/id_rsa):
在这里就是设置存储地址了.反正我是直接按的回车
然后还会返回
Enter passphrase (empty for no passphrase):
再次直接回车。
Enter same passphrase again:
再次回车。
Your identification has been saved in /home/forwhat.cn/.ssh/id_rsa.
Your public key has been saved in /home/forwhat.cn/.ssh/id_rsa.pub.
The key fingerprint is:
这里有一串数。我把他屏蔽了。
The key's randomart image is:
+--[ RSA 2048]----+
| |
| |
| |
| o |
| + . S |
| . = . o |
| o + +o.o |
|E o . o.=+. |
|.+ ==+ooo. |
+-----------------+
这样SSH key就生成了。直接cat一下就好了。
000000:~/a$ cat /home/forwhat.cn/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAAADAQ(我屏蔽了)
把显示出来的直接添加到github账户设置里边的SSH keys
。add.
回来在git pull
就开始远程拷贝代码了
版权声明:本文系www.forwhat.cn原创 ,尊重作者劳动,转载请标明出处。本文转载自www.forwhat.cn谢谢



- 本地搭建IPv6环境测试你的APP
- ASCII码表和键盘键码表(完整典藏版)
- linux的nohup命令的用法
- emlog rss.php访问报错【This page contains the following errors】
- IPV4与IPV6的区别(史上最详细)
- git pull 出错 fatal: Could not read from remote repository.Please make sure you have the correct access rights.and the repository exists.
- MySQL的JOIN用法
- 加强emlog的安全 更改后台管理登录路径
- Node.js中的模块接口module.exports浅析
- Sublime Text 3设置吊炸天PHP开发环境
本文地址:https://blog.hellozwh.com/?post=227
版权声明:若无注明,本文皆为“起点终站”原创,转载请保留文章出处。

